Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

same SNMP strings won't work on similar servers

Status
Not open for further replies.
Technicalx

Technicalx

IS-IT--Management
Dec 5, 2006
1
US
We have 20 HP DL 380 servers that were bought at the same time. All have similar BIOS and OS patches installed. We are using MRTG to pull stats. Using a MIBWalker, we found an OID to use in the polling but found that only a few of the servers provide any info.
We are polling CPU Utilization, Bytes Sent/Recieved, Page file usage, etc.... Nothing major.

1.3.6.1.4.1.232.19.2.10.2.1.11.1 (bytes recieved) might work on one or two servers, but I get nothing back on the others.

Have downloaded the latest MIBs from Compaq/HP but I get the same results.

Suggestions?
 
Status
Not open for further replies.

Similar threads

CryptoTuke
  • Locked
  • Question
Maximum buffer size on Winsock for sending one block of data over TCP / IP
Replies
1
Views
754
maybeimaleo
maybeimaleo
jmarkus
  • Locked
  • Question
Can I have a different private IP address which isn't on my router's subnet?
Replies
6
Views
628
sbcsu
sbcsu
Valsoray
  • Locked
  • Question
SNMP
Replies
0
Views
111
Valsoray
Valsoray
tsame
  • Locked
  • Question
SNMP: Finding MIB with OID
Replies
0
Views
116
tsame
tsame
anoop12
  • Locked
  • Question
SNMP agent identification of a device as Printer
Replies
0
Views
106
anoop12
anoop12

Part and Inventory Search

Sponsor

Back
Top