Samba short read error

[fdf]

Running Samba on SCO Open Server V with 15+ client PC's doing file transfers (put and get) back and forth.

Having a problem on only one of the 15+ clients. Can perform "put" and "dir" commands with no problem.

However, when we issue the "get" command below, we get a "Short read when getting file the following error" and "Only got 0 bytes". We get the same error on all files we attempt to "get" off that machine only. The "get" command:

smbclient //POS111/POS111 -UPOS111/POS111% -c get \abs\absrel\absdata\APV001.IF APV001.011

The result:

added interface ip=192.168.141.1 bcast=192.168.141.255 nmask=255.255.255.0
added interface ip=192.168.141.2 bcast=192.168.141.255 nmask=255.255.255.0
added interface ip=127.0.0.1 bcast=127.0.0.255 nmask=255.255.255.0
getting file APV001.011 of size 4057600 as APV001.011 Short read when getting file \\abs\absrel\absdata\APV001.IF. Only got 0 bytes.
Error SUCCESS - 0 closing remote file
(0.0 kb/s) (average 0.0 kb/s)

 

[fdf]

Still no resolutution of this problem.

Any ideas at all would be appreciated.