Sage Talk

[carolamrt]

Big Louie writes:

"The other board is Sage Talk with is the best resource going. If you are current on your maintenance then you can go to the Sage web page, log in and access the Sage Talk forums from there."


I could not find this on the Sage Website. I did find a knowledgebase and it evidently needs special permission for access. We are working on that but it requires sending in a fax, and getting approved. Has been more than a week.

Is this the same thing is Sage Talk?

Thanks Big Louie. You are helpful and we appreciate your taking the time to share yourself.

 

[BigLouie]

If you are a current MAS end user have your reseller contact Sage. It normally only takes a day. Once you can get into the support area of the Sage web page there is a link that will take you to Sage Talk.

 

[BigLouie]

Follow this link. All you need is your customer number. You can register and get right in. Go to Support and then MAS90/200 and the link to Sage Talk is in there.

http://www.sagesoftwareonline.com/eservices/Main/frmLogin.aspx