We are replacing an Aspect system in New Zealand with an S8700 and the client has asked if we could set up a temporary tie line during the transition period. The Aspect was previously connected to an Ericsson MD110 via QSIG so that is the protocol we would want to use (apparently the Aspect needs a new chipset for other protocols).
The client tells me that it took three weeks to get the tie to the MD working and a lot of tweaking on both sides was required at the time so any help you can give me is appreciated.
Has anyone ever done this before anywhere and if so, are there any notes re. setups available?
Thanks heaps in advance
The client tells me that it took three weeks to get the tie to the MD working and a lot of tweaking on both sides was required at the time so any help you can give me is appreciated.
Has anyone ever done this before anywhere and if so, are there any notes re. setups available?
Thanks heaps in advance
