s8300 services port login R6 1

[gandalf99]

Hi
Has anyone logged onto an CM S8300 R6 services port, tia.
1/ Do i set up laptop as 192.11.13.5 255.255.255.252 G/W 192.11.13.6 ?
2/ Do i log onto the CM application with putty and use terminal W2KTT?
3/ Can i use ASA.
Any comments appreciated, have'nt needed to log onto an s8300 for years.

 

[dialtonebone]

CM R6 only exists as a VM on VSP with an S8300. You'll need to access the VSP then SSH over (or use TCP forwarding).

#2 - that's how I do it.

#3 - you could

 

[gandalf99]

Thanks for the info, so provided tcp forwarding is enabled, i should be good to use Putty or ASA.