Sterrenjager
Programmer
Hi all,
Got a S8300 in the Netherlands and a S8300 LSP in Germany.
Release 4.01 with latest patches and firmware 1.5 on the stations.
Phones in Germany are the 9630, some with a SBM24 module.
On the SBM24 I got a few team buttons.
When my network is disconnected most phones register to the S8300 LSP except the stations with a SBM24 module.
When the network is back up most of the phones register to the main server without a problem, but still the phones with the SBM24 module will not work, and you cannot login on those phones.
When I do a list trace ras on the ip adress I get the following:
denial event 2081: IP FURQ-Invld sta state endpt 172.21.250.20
As soon as I remove the teambuttons from the SBM24 module the phones start correctly.
anyone got this problem or know the answer to prevent this (keep in mind I need the module for the teambuttons and that busy indicators are not the answer).
Hope to hear from someone.
Ronald
Got a S8300 in the Netherlands and a S8300 LSP in Germany.
Release 4.01 with latest patches and firmware 1.5 on the stations.
Phones in Germany are the 9630, some with a SBM24 module.
On the SBM24 I got a few team buttons.
When my network is disconnected most phones register to the S8300 LSP except the stations with a SBM24 module.
When the network is back up most of the phones register to the main server without a problem, but still the phones with the SBM24 module will not work, and you cannot login on those phones.
When I do a list trace ras on the ip adress I get the following:
denial event 2081: IP FURQ-Invld sta state endpt 172.21.250.20
As soon as I remove the teambuttons from the SBM24 module the phones start correctly.
anyone got this problem or know the answer to prevent this (keep in mind I need the module for the teambuttons and that busy indicators are not the answer).
Hope to hear from someone.
Ronald