Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Running a Crystal XI report within VB6 ?
- Thread starter mpodlesny
- Start date
mpodlesny:
I've responded to at least three of your previous posts about the same topic. Each one ended with a suggestion by either me or someone else, without any further response from you whether the suggestion worked/failed, or if you'd tried it.
I suggest you read faq222-2244 (particularly paragraph 16) from the VB forum for a nice overview of how to get the most out of this site.
Also, this type of post is better suited for either the Crystal Integrate (Forum768) or Crystal Other Topics (Forum149) forums. It's quite possible that there are experts with CR/VB development experience that don't read the Formulas forum.
-dave
I've responded to at least three of your previous posts about the same topic. Each one ended with a suggestion by either me or someone else, without any further response from you whether the suggestion worked/failed, or if you'd tried it.
I suggest you read faq222-2244 (particularly paragraph 16) from the VB forum for a nice overview of how to get the most out of this site.
Also, this type of post is better suited for either the Crystal Integrate (Forum768) or Crystal Other Topics (Forum149) forums. It's quite possible that there are experts with CR/VB development experience that don't read the Formulas forum.
-dave
- Status
Similar threads
- Question
- Question