Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Run Error: Low Memory Warning in Paradox 4.5

Status
Not open for further replies.

BillCT

IS-IT--Management
Joined
Apr 3, 2001
Messages
1
Location
US
Recently I have upgraded many of my diskless 486 machines running Dos 6.2 w/ 8megs ram to Celeron 500 w/64megs running Win98se. I have a large Paradox 4.5 application running on a Novell 3.12 server, with Novell Client 3.1, that runs 24/6.

Almost from the start of this upgrade I have been getting very intermittent “Run Error: Low memory warnings”. I have tried changing settings in the PIF file, making changes to the “-extk” parameter, changing operating systems (Win95, Win98, Win NT, 2000), using memory management programs to no end.

Requirements dictate that I run in a multi-tasking environment, having at least two programs running at once. This requirement excludes the possibility of running in Dos mode.

Has anybody else seen this error? And are there any possible solutions?

Thanks
Bill
 
Bill,

It *may* be related to disk space. Remember that PDOX/DOS only understands 2.1GB tops. If you have more than that, you may need the less space utility. Please see:


for details.

Hope this helps...

-- Lance
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top