rudpConfigShow - where is this run from?

[SherWat]

I have a CS1000E at 7.6

I would like to see what my keep alive configuration is for rudp - in an NTP I found but I don't know where I would run this command from? I don't believe it is from PDT.

Syntax: rudpConfigShow
This command displays the current configuration parameters for the RUDP connections.
-> rudpConfigShow Mode RUDP
Max retries 10
Timeout 400 ms
Bundle mode Off
Keep Alive 60000 ms
Payload ID 0xff
Window size 0
value = 21 = 0x15

Does anyone know where I run this from?
Thanks.

 

[bhassell2000]

Looks like it is run on the VGMC

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[SherWat]

Can I connect to the VGMC via CLI?

 

[SherWat]

OK I was able to access.
From the pdt> CTL + LDB
then su

ldb> su
-> rudpConfigShow
Mode RUDP
Max retries -2121612044
Timeout -442503116 ms
Bundle mode On
Keep Alive -2147418112 ms
Payload ID 0xc2ee07c4
Window size -1634052650
value = 31 = 0x1f
->


So my settings are above - now for the interpretation of it - does anyone know what the lines mean?
The keep alive setting of -2147418112 ms is 35,700 minutes which is 596 hours. Does this mean that the udp session stays alive this long? The - in front see odd to me.