RRAS routing help

[patrichek]

Hi all,
I have a w2k3 server 2 nics, my ip scheme on nic 1:
192.168.1.250
255.255.255.0
192.168.1.1

nic2:
172.31.1.2
255.255.255.0
no gateway

nic 1 has all PPTP WAN traffic forwarded from sonicwall router .

In RRAS I have setup static ip range of 172.31.1.50-75

I can connect to my vpn thru winxp client no problem and remote desktop to my server (192.168.1.250) but I can't access any network resources because they are on a different subnet.
How do i route the traffic from nic1 to my intranet (192.168.1.0)?
I want to keep them on separate ip subnets due to router defaults being the same as my intranet subnet.

Do i even need nic2?

thanks!

 

[msworld]

You should enable routing in the RRAS. Or post back with the routing table.

How to setup microsoft vpn
How To Configure a VPN Server to Act as a Router in Windows Server 2003, RRAS>Configure and Enable Routing and Remote Access>Custom configuration, ...

http://www.howtonetworking.com/articles/mssetupvpn.htm

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on

http://www.HowToNetworking.com