Stevehewitt
IS-IT--Management
Hi Guys,
Got a Windows 2003 Server with RRAS installed and working for VPN using PPTP.
Everything is working fine, with encrypted VPN traffic coming in past our firewall, hitting NIC1 on our RRAS box and connecting.
Essentially, as far as RRAS is concerned, NIC1 is VPN inbound traffic.
What I really want to do, is setup RRAS so that all NIC1 traffic is packet filtered using Windows. E.G I only want ports 3389 and 53 to be accessible for out VPN clients.
I have another NIC (NIC2). Whilst both NIC's are technically on the same subnet and plugged into the same switch, once NIC1 get the VPN inbound traffic.
So is there a way for me to get the NIC1 inbound VPN traffic, packet filter it and then shove it out over NIC2?
Cheers in advance,
Steve.
"They have the internet on computers now!" - Homer Simpson
Got a Windows 2003 Server with RRAS installed and working for VPN using PPTP.
Everything is working fine, with encrypted VPN traffic coming in past our firewall, hitting NIC1 on our RRAS box and connecting.
Essentially, as far as RRAS is concerned, NIC1 is VPN inbound traffic.
What I really want to do, is setup RRAS so that all NIC1 traffic is packet filtered using Windows. E.G I only want ports 3389 and 53 to be accessible for out VPN clients.
I have another NIC (NIC2). Whilst both NIC's are technically on the same subnet and plugged into the same switch, once NIC1 get the VPN inbound traffic.
So is there a way for me to get the NIC1 inbound VPN traffic, packet filter it and then shove it out over NIC2?
Cheers in advance,
Steve.
"They have the internet on computers now!" - Homer Simpson