RPE Loop

[CyberWorld]

Hi Guys,

I have an option 61/81, one of the onsite techs moved a cabinet from remote location and added it to the system in PBX location.

is there a LD or Command to enable the RPE loop ?
I can stat the loop and cards and get results but
the lights dont go out on the cards and i have no dial tone

but yet it let me build the 2616 sets on thos cards

i can dial the number and it rings in the switch, i can stat
stat 37 0 1 and it comes back with idle on the tn the set it built on.

did i miss something ?

 

[pabxdude]

Hi;

You might want to try the NORTEL page, not NEC.

Cheers.