Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Routing with D-link 300G+

Status
Not open for further replies.

unixfreak

ISP
Oct 4, 2003
632
GB

I've tried searching for this but couldn't find an answer.

I've got a router connected to my modem. Until yesterday I had one static IP address and it worked fine. I then got a four address range because of work requirements but can't get it to work.
My range ends in .232, .233, .234 and .235 /30. My DHCPs and gets .233 (correctly). The modem then shows the PPP address as .234 which is where I think it's going wrong.
My ISP won't help but mentioned that I had to specify the addresses myself instead of letting the modem negotiating it.
I don't know how to do that or which addresses to give it. Anyone have a similar setup? Help would be much appriciated!

Cheers
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top