Routing to two remote subnets

[flyingkiwi69]

At the office we have firewall with internal interface (192.168.0.0) and DMZ (172.16.10.0) interface. Mail server is on DMZ. I Can only access the internal network through the VPN. Internal network can access the mail server fine (route has been set in RRAS on w2k3 server)

How do I connect to mail server through the VPN tunnel created between remote router and firewall? Somehow traffic to 172.16.10.0 network needs to be routed through VPN...but how do I do this?

Jon

 

[msworld]

you may have two options. add touting table manually or add it in RRAS. these pages may hel[,

routing
Routing issue if the the LAN and VPN are in different subnets Routing order Understanding Route Automatic Metric We have a PIX 515. what's the command to ...

http://www.howtonetworking.com/routing.htm

- Similar pages

rouitng how to

http://www.howtonetworking.com/Networking/routing.htm

Bob Lin, MS-MVP, MCSE & CNE
How to Setup Windows, Network, VPN & Remote Access on

http://www.HowToNetworking.com