routing table

[austinhealy]

Hi,
Where in the system are the static routes stored.
I had some one put in a wrong route then flushed routes
to remove it. I need to recreated all the routes and it would make life much easier if I could get this info from my backup tape.
Thanks

 

[w5000]

I believe all static routes you configured were stored in ODM in some inet0's stanzas.

usually they are seen on "lsattr -El inet0" output... (default and configured static routes)...

so if you didn't remove routes from ODM (inet0) configuration then you can easily restore them by running for example:

mkdev -l inet0