Routing Subnets over two local ports on a SS2 Netbuilder

[ahaley]

On a SuperStack II NETBuilder SI ISDN U platform how do I enable routing between ports 1 and 2 given the following.

port1.
216.84.223.254
255.255.254.0

port2.
216.254.36.254
255.255.255.0

Any ideas or help would be much appreciated. I know it's a very easy question I'm just at a loss.

 

[rogodeter]

I would ensure routing is enabled and a routing protocol is selected and enabled.Use ( me -ip cont) to check if routing is enabled. ( me -ospf cont) to check for routing protocol or substitute your routing protocol for ospf)