Routing specific number and adding digits 1

[tomkuk]

I have one particular number I want to rooute all calls to this down a specific circuit.

I have setup route 126 for this.

not 100% sure on best way to configure the number to do this.

e.g. 020 1234 5678 but adding in 0044 at the front.

Thanks.
Tom.

 

[bigindian65]

ld 86
new
DGT
DMI 126
DEL
INST 0044


then on RLI 126
at DMI prompt put 126

Mato' Was'aka

 

[GHTROUT]

To route one particular number within an SPN, use the ARRN method, available in Rls 25 and up, through 7.x

On the Alternate RLI, use DMI to insert extra digits.

http://www.ghtrout.com/ghtrout/files/Using_ARRN_in_BARS.html

--
Nortel Resources at GHTROUT.com
--

 

[bigindian65]

He said all calls, so didn't bring up ARRN, not sure though

Mato' Was'aka

 

[GHTROUT]

You get a star for effort

I have one particular number I want to rooute...

--
Nortel Resources at GHTROUT.com
--

 

[bigindian65]

lmao

Mato' Was'aka

 

[tomkuk]

So this should have the required results for the SPN? And then I just need to create the DMI to insert the 0044 part?

REQ PRT
CUST 0
FEAT NET
TRAN AC1
TYPE SPN

SPN 0

SPN 0
FLEN 12
ITOH NO
CLTP NONE
RLI 30
ARRN 02012345678
ARLI 126
SDRR ARRN CODES = 1
ITEI NONE

 

[GHTROUT]

If the user dials 9 for an outside line, this is what will happen in your example:

9,002012345678 will point to RLI 126.
9,0+anything+else will point to RLI 30

Did you mean to preface the ARRN with 0? If so, then make a DMI to INST what you need and add it to RLI 126


--
Nortel Resources at GHTROUT.com
--

 

[tomkuk]

People will dial 9, 02012345678
So I guess I need to drop the first 0 in the ARRN?
Now thinking I will also need to do something for people that dial 9,12345678 dropping the area code.

Many thanks

SPN 0

SPN 0
FLEN 12
ITOH NO
CLTP NONE
RLI 30
ARRN 2012345678
ARLI 126
SDRR ARRN CODES = 1
ITEI NONE

SPN 1

SPN 1
FLEN 12
ITOH NO
CLTP NONE
RLI 30
ARRN 2345678
ARLI 126
SDRR ARRN CODES = 1
ITEI NONE

 

[GHTROUT]

As far as I can tell, you have interpreted it right.

RLI 126 can take 020112345678 (as shown in your SPN 0)

Are you certain the Trunk Route in RLI 126 can take 12345678 (as shown in your SPN 1) ?

--
Nortel Resources at GHTROUT.com
--

 

[tomkuk]

This is RLI 126

RLI 126
ENTR 0
LTER NO
ROUT 126
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
VNS NO
CNV NO
EXP NO
FRL 0
DMI 0
FCI 0
FSNI 0
BNE NO
SBOC NRR
IDBB DBD
IOHQ NO
OHQ NO
CBQ NO

ISET 0
NALT 5
MFRL 0
OVLL 0

 

[GHTROUT]

As long as you can dial the numbers as they are entered in the SPN over Trunk Route 126, you are good.

--
Nortel Resources at GHTROUT.com
--