Routing problem

[suiram]

I have a Raptor Mobile Client installed on a Windows 2000 server with 2 network cards. One network card (IF1) has a real IP and the other card (IF2) has an internal IP address.
I would like to use this server as a gateway for the internal net to access the VPN.
The problem is that I am not able to configure the server to route between the interface IF2 and IF1 so that an internal workstation (having IF2 as a gateway) can send packets over the VPN.

 

[Guest_imported]

suiram,

do you put your route ip 0.0.0.0 netmask 0.0.0.0?

cause it need to route to itself first the it will go to the router.

 

[rene1000]

this won't work. you need to setup another firewall and configure a site to site VPN instead of a client to site VPN. The raptor mobile just won't let other clients connect through the VPN.