routing problem

[WCHPikus]

Hello
Hicom 300E
I have problem with connection from first E1 to second E1.
I can not dial from E1=>E1.

This routing not working.
What is wrong?
I can sent setup.
Please help.
Regards
WCHPikus

 

[niels49]

That is a large count of points, where it can blocked. Is the acces-code to the second E1 in the AMO WABE in traffic-situation 6 administrated?
Is in the main-part of the AMO ZAND a connection from trunk to trunk allowed?
Has the first E1 the rigth (COS, LCOSS, LCOSD) to acess the second E1?

Bye
Niels

 

[WCHPikus]

Hello!
Solution:
In both PRI setup the BPX "master" side.
Check the cos, cot in tdcsu
Now it is working
Regards
WCHPikus