Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Routing Problem with RRAS

Status
Not open for further replies.

gbaker

MIS
Nov 27, 2001
77
US
I have a problem with RRAS. My setup is this, I have all clients on the network set to use an alternate gateway when hitting a specific subnet.

client route 209.104.0.0 --> 10.0.0.5

on router

nic 1 LAN IP 10.0.0.5
Mask 255.255.255.0
No Gateway

nic 2 WAN ip 24.153.204.163
mask 255.255.255.128
Gateway 24.153.204.129

Router is configured as lan router, RIP enabled.

Static route of 204.109.0.0 mask 255.255.0.0 >24.153.204.129

Connectivity is good on both sides, but simply will not route. All tracerts end at 10.0.0.5.

Any ideas??
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top