Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Routing Problem with Public IP's in DMZ on ASA5505 Sec+ Unlimited

Status
Not open for further replies.

talphius

Technical User
Jul 1, 2002
24
US
We have a new ASA5505 with the Security Plus Unlimited License. We are trying to setup two web servers in our DMZ with PUBLIC IP addresses (as required by our application). These machines CANNOT be NAT'ed in the DMZ.

Network Space (IP's have been sanitized from their production values):
Inside -- 192.168.2.1/24
VPN Pool -- 192.168.1.1/24
Outside -- 71.1.2.246/30 (ISP Router is 71.1.2.245)
Assigned IP Block from ISP (DMZ Addresses): 71.1.6.160/29

* As you'll see in the config, the inside addresses NAT outbound which works perfectly
* The DMZ hosts are configured with rules to allow inbound ICMP and HTTP traffic.
* Each server in the DMZ is using 71.1.6.161 as it's gateway (which is the address bound to the DMZ interface on the ASA). Each server can ping each other as well as the gateway IP successfully.
* If you attempt to browse (HTTP) to a DMZ webserver from an outside computer, the ASA logs the traffic request (i.e.: Built inbound TCP connection 2140 for outside:152.71.13.29/37768 (152.71.13.29/37768) to dmz:71.1.6.163/80 (71.1.6.163/80)), but nothing is ever served up
* There's also quite a few deny messages in the logs for people trying to connect to SSH and FTP, which makes me believe that the firewall portion is setup properly.

The strange thing is that we cannot connect to the internet FROM either of the webservers, nor can we ping the webservers by IP from outside, nor does it appear that any traffic is making it to the servers.

Pings from the ASA to the DMZ IP's work properly if over the DMZ interface. If you do a ping using the outside interface, the ASA logs an error: (Routing failed to locate next hop for icmp from NP Identity Ifc:71.1.2.246/0 to outside:71.1.6.163/0)

I'm apparently missing something on the routing between the DMZ Public IP's and the outside Interface. Any assistance would be appreciated!

Thanks!



Code:
Note: This has been SANITIZED with Fake IP's
--------------------------------------------------------
 
ASA Version 8.2(1) 
!
hostname asa5505
domain-name company.com
enable password <<REMOVED>> encrypted
passwd <<REMOVED>> encrypted
names
!
interface Vlan1
 nameif inside
 security-level 100
 ip address 192.168.2.1 255.255.255.0 
!
interface Vlan2
 nameif outside
 security-level 0
 ip address 71.1.2.246 255.255.255.252 
!
interface Vlan12
 nameif dmz
 security-level 50
 ip address 71.1.6.161 255.255.255.248 
!
interface Ethernet0/0
 switchport access vlan 2
 speed 100
 duplex full
!
interface Ethernet0/1
 switchport access vlan 12
!
interface Ethernet0/2
 switchport access vlan 12
!
interface Ethernet0/3
 switchport access vlan 12
!
interface Ethernet0/4
 switchport access vlan 12
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
ftp mode passive
dns server-group DefaultDNS
 domain-name company.com
same-security-traffic permit intra-interface
object-group network web_servers
 network-object host 71.1.6.163
 network-object host 71.1.6.164
access-list clientvpn_splitTunnelAcl standard permit 192.168.2.0 255.255.255.0 
access-list inside_nat0_outbound extended permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.224 
access-list dmz_access_in extended permit icmp any object-group web_servers 
access-list outside_access_in extended permit tcp any object-group web_servers eq www 
access-list outside_access_in extended permit icmp any any 
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
mtu dmz 1500
ip local pool vpn_pool 192.168.1.11-192.168.1.20 mask 255.255.255.0
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
icmp permit any dmz
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (dmz,outside) 71.1.6.163 71.1.6.163 netmask 255.255.255.255 
static (dmz,outside) 71.1.6.164 71.1.6.164 netmask 255.255.255.255 
access-group outside_access_in in interface outside
access-group dmz_access_in in interface dmz
route outside 0.0.0.0 0.0.0.0 71.1.2.245 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 192.168.2.0 255.255.255.0 inside
http 192.168.1.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac 
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac 
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac 
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac 
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac 
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac 
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac 
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac 
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac 
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac 
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
telnet timeout 5
ssh timeout 5
ssh version 2
console timeout 0
management-access inside
dhcpd auto_config outside
!
dhcpd address 192.168.2.11-192.168.2.20 inside
dhcpd dns 208.67.222.222 interface inside
dhcpd enable inside
!
 
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy clientvpn internal
group-policy clientvpn attributes
 dns-server value 4.2.2.2
 vpn-tunnel-protocol IPSec 
 split-tunnel-policy tunnelspecified
 split-tunnel-network-list value clientvpn_splitTunnelAcl
username <<REMOVED>>  password <<REMOVED>>  encrypted privilege 0
username <<REMOVED>>  attributes
 vpn-group-policy clientvpn
tunnel-group clientvpn type remote-access
tunnel-group clientvpn general-attributes
 address-pool vpn_pool
 default-group-policy clientvpn
tunnel-group clientvpn ipsec-attributes
 pre-shared-key *
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map 
  inspect ftp 
  inspect h323 h225 
  inspect h323 ras 
  inspect rsh 
  inspect rtsp 
  inspect esmtp 
  inspect sqlnet 
  inspect skinny  
  inspect sunrpc 
  inspect xdmcp 
  inspect sip  
  inspect netbios 
  inspect tftp 
!
service-policy global_policy global
prompt hostname context 
Cryptochecksum:0cedb446a0ef0f7577804f665c473427
: end
no asdm history enable
 
use the asa in transparent mode.

Brent
Systems Engineer / Consultant
CCNP, CCSP
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top