Guest_imported
New member
- Jan 1, 1970
- 0
I have two different subnets 172.16.20.0/24 172.16.30.0/24 both are going to a cisco pix which i want to send to two different routers depending on where they are coming from the first subnet or the second. so if it comes from subnet A go through the pix and use router A, if a packet comes from subnet b go through the pix to router B.
i made an access list 2 and 3 that permit both of these subnets only but i wanted to use a route map or something to make sure each subnet goes to its appropriate router after hitting the pix.....any suggestions?
i made an access list 2 and 3 that permit both of these subnets only but i wanted to use a route map or something to make sure each subnet goes to its appropriate router after hitting the pix.....any suggestions?