We r having a SCO Open server 5.0.4
The IP of the server is 192.1.45.201
We have two way connectivity to our corporate WAN, one via Leased Line and other via VSAT.
The IP of the router is 192.1.45.21
The IP of the VSAT IDU is 192.1.45.22 and the VSAT IDU is terminated in the Switch.
The default gateway is 192.1.45.21
The routed daemon is stopped.
Regularly we are accessing our corporate server 10.10.0.3
The routing table entry is
# netstat -r
Routing tables
Destination Gateway Flags Refs Use Interface
default 192.1.45.21 UGS 0 13 net0
localhost localhost UH 1 1686 lo0
192.1.45 loninew3 UC 1 0 net0
224 loninew3 UCS 0 0 net0
When ever the leased line is down the router redirects the packet via VSAT.
The hops are
192.1.45.21
192.1.45.22
...
...
10.10.0.3
Once this happens the routing tablw is being updated with
# netstat -r
Routing tables
Destination Gateway Flags Refs Use Interface
default 192.1.45.21 UGS 0 13 net0
10.10.0.3 192.1.45.22 ??? ? ? ????
localhost localhost UH 1 1686 lo0
192.1.45 loninew3 UC 1 0 net0
224 loninew3 UCS 0 0 net0
After this
When the Leased line comes up the Table is not getting refreshed. We have a problem in connecting the 10.10.0.3 server.
Can any one help in this regard.
Parthiban M Perumal
Mumbai - INDIA
The IP of the server is 192.1.45.201
We have two way connectivity to our corporate WAN, one via Leased Line and other via VSAT.
The IP of the router is 192.1.45.21
The IP of the VSAT IDU is 192.1.45.22 and the VSAT IDU is terminated in the Switch.
The default gateway is 192.1.45.21
The routed daemon is stopped.
Regularly we are accessing our corporate server 10.10.0.3
The routing table entry is
# netstat -r
Routing tables
Destination Gateway Flags Refs Use Interface
default 192.1.45.21 UGS 0 13 net0
localhost localhost UH 1 1686 lo0
192.1.45 loninew3 UC 1 0 net0
224 loninew3 UCS 0 0 net0
When ever the leased line is down the router redirects the packet via VSAT.
The hops are
192.1.45.21
192.1.45.22
...
...
10.10.0.3
Once this happens the routing tablw is being updated with
# netstat -r
Routing tables
Destination Gateway Flags Refs Use Interface
default 192.1.45.21 UGS 0 13 net0
10.10.0.3 192.1.45.22 ??? ? ? ????
localhost localhost UH 1 1686 lo0
192.1.45 loninew3 UC 1 0 net0
224 loninew3 UCS 0 0 net0
After this
When the Leased line comes up the Table is not getting refreshed. We have a problem in connecting the 10.10.0.3 server.
Can any one help in this regard.
Parthiban M Perumal
Mumbai - INDIA