routing did to trunk group help

[ahannigan]

Hi there
I am using a G3 and want to route DID's through a trunk group and when that ext is called it should route accross the T1 to my endpoint.
Right now i have a phantom ext 3778 with no coverage and built a aar analy to route to route 21 to my trunk group.
I get a fast busy when calling 3778.
I tried to remove the ext and just call the digits 3778, same thing.
Any ideas on how to achieve this and keep my calling line id?
AH

 

[PBXadmin]

It sounds like you are on the right track. Are you using the UDP tables? If you define 3778 in the UDP table as a UDPCode with 200 and then go to the AAR table and route 200 to your trunk-group it should work. In your route-pattern delete the three digits (200) which will only send 3778 over to the other side.

If you need more help on setting this up let me know.

 

[ahannigan]

thanks so much...now is there anyway in the world to do this if you do not have UDP?

 

[ahannigan]

Is there a way to do this with out UDP and Prvt Networking,
I want to get the called line ID on the other side.
Thanks
A

 

[ahannigan]

here is what i have to get the closest i can,
I built a vec and vdn with a route to number and used the tac to get it to go, but not getting and info on the other side.
help!!