Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

routing DID routes via IP network

Status
Not open for further replies.
Feb 20, 2011
12
IR
Hi All'
We have 6 individual LIMS (TSW-SP6)in four different locations.The telco only gives us PRI ISDN in one location.We want to know if it is possible for us to make an IP network between LIMS and recieve all calls from ISDN in LIM no1 and route them automaticallly to their destination via LIM 1?
thanks
 
sure you can do that.
all you need is an IPLU per site and enough bandwith per site.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Thanks Daddy
I recieve 4 digits from ISDN.And My exensions are three digits.What commands do I use to send the right digits to the right LIMs?Do I use Nutri?
Thanks
 
nutri is an option but you can solve this via RODDI (don't send the preceding 4th digit)
are the extensions grouped by site (for example extensions 300-399 in site A, extensions 400-499 in site B, and so on)?

/Daddy



-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top