Routing Citrix clients through a PIX 515 Firewall

[CertifiedNut]

Hi, I'm trying to get clients on my LAN to route through a PIX 515E firwall to reach the server farm at another office. Does anyone know the configuration I should use on the PIX to let this happen? The Citrix farm is published via web interface across a http/ica connection. Thanks

CNut

 

[Supergrrover]

Unless you have restricted access outbound, it should just work. Check to see if you have
access-group [ACL_NAME] in interface inside

If so, check that ACL and see what it is blocking. You can then just add ica ports outbound (i believe it is 1494.)


Brent
Systems Engineer / Consultant
CCNP, CCSP