Routing between spokes on site-to-site VPN

[aisdale]

Hi people

I have a 515e (hub) and 3 506's (spokes) connecting via a site-to-site VPN. Spokes -> Hub and Hub -> Spokes works perfectly. I just need the Spokes to be able to route between eachother aswell.

Can someone please point me in the right direction?

Thanks

 

[Supergrrover]

Here is the setup

http://www.cisco.com/en/US/products...s_configuration_example09186a00804675ac.shtml

You will need PIX OS7 on the 515 acting as the hub. OS6 will not do it.



Brent
Systems Engineer / Consultant
CCNP, CCSP

 

[aisdale]

Hi Brent

Thanks alot, working like a dream now!

I had it all apart from "same-security-traffic permit intra-interface"

amazing what one command can do

thanks again
Aisdale