Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Routes
- Thread starter Blutch
- Start date
mdsurfrider
IS-IT--Management
I had a similar issue which was resolved by using Windows Connection Manger to customize the client routing tables(installed via Add/Remove Programs | Windows Components |).
To troubleshoot, I would suggest looking at the routing table on the client before and after the VPN connection.
Do this w/ the "route print" command.
Secondly, try adding some manual routes to your other subnets. Once you have an idea of what routes you need, add them to the route table on the connection manager.
See
Good luck,
Michael Law - MCSE, CCNA, SCSA, MCIW
Qualatech Computer Consulting, LLC
To troubleshoot, I would suggest looking at the routing table on the client before and after the VPN connection.
Do this w/ the "route print" command.
Secondly, try adding some manual routes to your other subnets. Once you have an idea of what routes you need, add them to the route table on the connection manager.
See
Good luck,
Michael Law - MCSE, CCNA, SCSA, MCIW
Qualatech Computer Consulting, LLC
- Status
Similar threads
- Locked
- Question