Router Connection Help - Please!

[cisconewbie]

I am new in the cisco world I have here a Cisco 2514 router and a Catalyst 1924 switch, how do I connect the two together? I also have a Pix 501 firewall that I would like to connect them to, what do i need to hook my router to the firewall?

Thanks For the Help!!

CiscoNewbie

 

[Guest_imported]

Im not sure if this is what you want to know. But, to hook your router to the switch just hook the Ethernet port in to the switch.

 

[cisconewbie]

Both the router and switch have AUI ports, do i use that, do i need to get transcievers or can is there a AUI cable that I can get to use?

 

[Guest_imported]

get 2 aui adapters for the router leave the AUI on the switch alone..
Easy rule to remember if the ports are marked 1x then 2x to x = crossover 1 to 2 crossover
1x to 2 patch cable.
look at the eth ports and they will have a little x at the bottom of the number or have none at all

Oz

 

[cisconewbie]

on the router it just says AUI 0 & AUI 1....... on the switch there is just one AUI port on the back... So I will need 3 Transcievers and 3 patch cables?