I want to create a VPN between two computers that are in diferentes locations. One of this has a W NT server version 4.00 and the other one has W98, but in one of the office we have an ADSL router connect directly with our HUB. How can we make a VPN through the ADSL Router?.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Router ADSL
- Thread starter minondo
- Start date
What router are you using?
Have you chosen a VPN package?
Does the router have firewall capabilities and is it enabled?
More than likely, you will need to set-up the router to pass through (I.e. Static Route) port 1723 to the IP of the server for the VPN connection. (Which I’m assuming would be the NT server). Thus, once you have a VPN package installed, install the client on the Win98 machine, and then connect to NT4.0 Server, which the router should then pass the packets to the IP of the VPN server.
Have you chosen a VPN package?
Does the router have firewall capabilities and is it enabled?
More than likely, you will need to set-up the router to pass through (I.e. Static Route) port 1723 to the IP of the server for the VPN connection. (Which I’m assuming would be the NT server). Thus, once you have a VPN package installed, install the client on the Win98 machine, and then connect to NT4.0 Server, which the router should then pass the packets to the IP of the VPN server.
- Status
Similar threads
- Locked
- Question
- Locked
- Question