I have been try to make an ACL to keep my VPN users from get to my core server network. But everytime I put the access group I loose connectivity to the router. The following is the acl:
VPN network - 192.15.6.0
Internal - 192.15.5.0
Core - 24.63.5.0
router - intfa0/1 192.15.5.2 (8 other smaller networks use this interface to access the core server network)
intSer0/0 24.63.5.1
access-list 1 deny 192.15.6.0 0.0.0.255
access-list 1 permit 192.15.0.0 0.0.255.255
access-list 101 tcp deny 192.15.6.0 0.0.0.255 any
access-list 101 udp deny 192.15.6.0 0.0.0.255 any
access-list 101 tcp permit 192.15.0.0 0.0.255.255 any
access-list 101 udp permit 192.15.0.0 0.0.255.255 any
intfa0/1
ip access-group 1 in
ip access-group 101 in
Ctrl-Z (then I loose connection, and have to reboot so the old config will give me back connectivity.
Can someone tell me what I am doing wrong? Please!!!
VPN network - 192.15.6.0
Internal - 192.15.5.0
Core - 24.63.5.0
router - intfa0/1 192.15.5.2 (8 other smaller networks use this interface to access the core server network)
intSer0/0 24.63.5.1
access-list 1 deny 192.15.6.0 0.0.0.255
access-list 1 permit 192.15.0.0 0.0.255.255
access-list 101 tcp deny 192.15.6.0 0.0.0.255 any
access-list 101 udp deny 192.15.6.0 0.0.0.255 any
access-list 101 tcp permit 192.15.0.0 0.0.255.255 any
access-list 101 udp permit 192.15.0.0 0.0.255.255 any
intfa0/1
ip access-group 1 in
ip access-group 101 in
Ctrl-Z (then I loose connection, and have to reboot so the old config will give me back connectivity.
Can someone tell me what I am doing wrong? Please!!!