Route to IP Office

[chrismac52]

I have a definity G700 connected via H.323 to an IP Office 406v2. I can call from the ip office just fine, but I cannot call to the IP Office. I am having a hard time figuring out the call routing on the definity side.

To make it work I made FAC 3 select the AAR table. I then made Vectors and VDNS for all of the extensions so that we would not have to dial the 3 first. This works but seems to be causing problems when covering to audix. If anyone could help me with a better way to route the calls, I would appreciate it!

 

[eltorodeoro]

use the uniform dialing table. works a bit like ars analysis. input the dialed string (extension number), and append an aar code (222, 100, whatever makes sense for your network). go to the aar analysis table and send that dialed string (now beginning with the aforementioned aar code) to a route pattern. on that route pattern, input your frl, trunk group, and finally delete the aar digits that you appended earlier.

 

[chrismac52]

Do you have any examples or screen shots you could send my way?

 

[eltorodeoro]

sorry, no. just what's in the ol' noggin. the docs probably have a walk through on UDP somewhere.