Route problem

[motard]

Hello.
I have a MD110 BC12 SP9 R6A. I´m trying to program a diversion in NUTRI; I mean when the number 9XX XXX 151 is received from Public Network, I want to forward the call to an external number 0 9XX XXX XXX:
NUTRP;
ENTRY CNVTYP NUMTYP TRC CONT PRE
9XX XXX 0 0 6 1
151 0 12 3 0 9XX XXX XXX

If I make a call to the number 9XX XXX 151, it´s rejected. The incoming/outgoing route is the same for the call. If I program another route with the same parameters, and trunks of the main route, and another DEST ( 791 ) and I program the PRE in NUTRI with the dest=791:
NUTRI:ENTRY=151,CNVTYP=0,NUMTYP=12,TRC=3,PRE=7919XXX XXX XXX
The call proceed OK. But when the call go into and go out for the same route the call is rejected.

<RODAP:ROU=ALL;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 SL60 H'00000110 H'04C00000 H'220900A0 NO


ROCAP
SEL 0110100010000010
SERV 3101000007
TRAF 03151515
SIG 011111000031
BCAP 111110

Any idea????????
Thanks beforehand.

 

[fouesnant]

Hi

Have a look at ASPAPARNUM=118;
Set it to 0, and then in and out on the same route should work

Best regards

 

[motard]

It´s OK
Sorry for delay.
Thanks