Route Map--Need Professional's Guidence

[ramizbsd]

I have a 7206 on which i have two wan links on s0/1 and s0/2 and traffic from

users entering from eth0/1. Now i want to route traffic comming from 5 networks

to link connected to s0/1 and other networks traffic to link connected to s0/2.

Now my 1st question is: either is use "set interface s0/1" or "set ip next-hop"

command related to isp setups.
Second question: in such network scenerio professions use named Access-List or

numbered ACL to use with route maps and please explain also.

Regards.

 

[KiscoKid]

Use "set interface" if the interface is a point-to-point connection otherwise use "set ip next-hop"

I prefer Named Access Lists most of the time as they allow me to modify the contents without having to remove the entire list and re-applying it.