Route for specified trunk call

[CHRIN1]

Dear,

I am also a stupid guy on MD110 BC11,
can someone hlp me how to fix extensions 200&&205 to only 1 trunk with equ=1-0-62-01 during route to external.

Anyway my system got only 1 rou
ROCAP:ROU=ALL;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF
1 012000000000001 4 2100000000 0 30 128 03151515
SIG BCAP
211000000000 001100

and the code for external access is 0

END

 

[lalrl]

for a beginner not so easy to do... What is the reason to do so? Should this trunk being exclusively reserved for this two extensions for outgoing calls? How many trunk-lines do you have?

 

[TRIDENT100]

you must spilt ROU=1 to 2 routes and use CUST both for extensions and route

 

[rfpui]

Hi CHRIN1

lalrl have right. It is no so easy.
TRIDENT100 have 50% right. I think that no customerisation is needed but split this lines to 2 route’s is needed.

General question Why do you need this solution?
Q1:
what type is of this external line? ( analog or digital /ISDN/)
Q2
Is this two way line/route? Incoming and outgoing?
Q3
Are this extensions 200&&205 digital extension?

 

[CHRIN1]

dear rfpui,

I would answer your question

G Q: because i need to have privat trunk (1-0-62-01) reserved for only ext 200 to 205. only this trunk that
available for international call ( there are 20 number from pstn to my PBX and only 1 that can international access).

An 1: the external line (PSTN) is analogue
An 2: only one way for outgoing
An 3: The extensions is analogue

regards

 

[rfpui]

My solution
Create new route with this one line.
Create new destination code for new route.
Modify extensions category to permit ext 200&&205 to use new destination code and existing zero and block other extension for using new destination code.

New route
ROCAP:ROU=1;
RODAP:ROU=1;

ROCAI :ROU=10,SEL= ,SIG= ,TRAF= ,TRM= ,SERV=
RODAI :ROU=10,TYPE=,VARI=,VARO=,VARC=;

SEL,SIG,TRAF,TRM SERV
VARI,VARO,VARC --- copy from rocap rodap printout
New rote is rou=10;
ROEDP:ROU=1,TRU=ALL;
Find TRU for EQU=1-0-62-01
ROEQE:ROU=1,TRU=
ROEQI:ROU=10,TRU=1-1,EQU=1-0-62-01

NANSI:NUMTYP=ED,NUMSE=9;

RODDPEST=0;
RODDIEST=9, ROU=10,ADC=, SRT=, TRC= (copy from roddp printout)
Access code for this special line is now 9

How to modify extension category? It is other problem.
If you want help send printout
EXCCP:CAT=ALL;
EXCAPIR=200&&205;
EXDDPIR=200&&205;
EXDDPIR= XXX where xxx is extension not permitted to use new dest. code.
NADAP:NUMTYP=CD;

BTW
The best way is use digital phone with additional key with led

 

[CHRIN1]

Many thanks for your clearly explanation
Right now i alraday create new row ROU=2
with ED=7 coz 9 is set for operator:-(.
in that time i had changed and blocked others
extension too.

with my regards
happy new year.....

 

[TRIDENT100]

Sorry rfpui but the best way to do this is the following;

Spilt ROU=1 into 2 routes

RODDIEST=0,ROU=1,ADC=, SRT=, TRC=
RODDIEST=0,ROU=2,CHO=1,CUST=1,ADC=,SRT=,TRC=

If you do this only extensions with CUST=1 will use ROU=2, and 9 is still free for other use

Trident

 

[rfpui]

Maybe
But 6 extension 200&&205 have only one outgoing line.
In my solution 200&&205 can make simultaneous external call.
They have no chance to do conference with more that one external line.
If one of this special extensions make external call other can’t make external call
This special line is to make international call.