Route call to external # off remote IPO

[twvnet]

Need to know how to set up the pieces to route a call from SiteA over VoIP trunk to SiteB, then out a PRI trunk at SiteB to the PSTN. The objective is for a user at SiteA to be able to dial out to the PSTN in SiteB's city to take advantage of the VoIP trunking to avoid toll charges. I've reviewed all the Avaya IPO docs on Least Cost Routing, Incoming Call Routes and Short Codes, but can't put the pieces together to get it done. The docs get you from site to site, but not from site to remote PSTN with the dialed # passed all the way through.

The VoIP trunking and SCN is set up just fine. Just need to figure out how to set up the call routing.

Thanks in advance for your assistance!

 

[IPOJedi]

If you have set up the voip link and have your voip linr number then all you need to do at site b is alter the ? . dail to use the voip line number instead of the isnd default 0 line number.
Thus site b will dial out over the voip link and off out on the isdn on site a