Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ROUTE CALL CONTROLLED command
- Thread starter joynew68
- Start date
Per the Scripting Guide:
"The Controlled keyword only works if the ultimate destination (directly, or indirectly through switch features such as Call Forward) is an internal DN (that is, on the same switch). If the DN is an external number that cannot be connected (for example, because it is busy), the Controlled option can be ignored. If this occurs, the caller receives a busy tone, and the script stops processing the call. . . . Controlled mode applies only if the destination is an internal DN that is busy or does not exist.
"The Controlled keyword only works if the ultimate destination (directly, or indirectly through switch features such as Call Forward) is an internal DN (that is, on the same switch). If the DN is an external number that cannot be connected (for example, because it is busy), the Controlled option can be ignored. If this occurs, the caller receives a busy tone, and the script stops processing the call. . . . Controlled mode applies only if the destination is an internal DN that is busy or does not exist.
- Status
Similar threads
- Locked
- Question
- Locked
- Question