Route & COT...Am I on the right Track?

[t2theroy]

Could someone have a look and see if I'm on the right track.
I'm new to all this and have made it this far with everyones help from here.

I've created a new route "0" in Ld 16
and COT line on 7 1
(I am reusing a system from another company and just want to add our phone line to the PBX system and use the digital phones etc) heres what I've done so far.. my question is am i on the right track, and where do i go from here to receive or make calls?

REQ new

TYPE rdb

CUST 0

DMOD

ROUT 0

DES sunsel

TKTP cot

PRIV

SAT

RCLS

DTRK

ISDN

PTYP

AUTO yes

ICOG iao

RANX

SRCH

TRMB

STEP

ACOD 6011 <--Unsure what this should be---

SCH0192
ACOD 6010

SCH0192
ACOD 7000

SCH0192
ACOD 6012 <--ACOD used---

CLEN

CPP

TARG

BILN

SGRP

OABS

CNTL

DRNG

CDR

MUS

MR

MANO

EQAR

FRL

TTBL

ATAN

OHTD

PLEV

MCTS

ALRM


MEM AVAIL: (U/P): 1145215 USED U P: 174879 56161 TOT: 1376255
DISK RECS AVAIL: 429
RAN RTE AVAIL: 2500 USED: 0 TOT: 2500
REQ ****

OVL000
>ld 14

TRK000
MEM AVAIL: (U/P): 1145215 USED U P: 174879 56161 TOT: 1376255
DISK RECS AVAIL: 429
TNS AVAIL: 109 USED: 91 TOT: 200
RAN CON AVAIL: 12 USED: 0 TOT: 12
MUS CON AVAIL: 100 USED: 0 TOT: 100
AST AVAIL: 100 USED: 0 TOT: 100
DATA PORTS AVAIL: 2500 USED: 0 TOT: 2500
ITG ISDN TRUNKS AVAIL: 2500 USED: 0 TOT: 2500
TRADITIONAL TRUNKS AVAIL: 2479 USED: 21 TOT: 2500
REQ new

TYPE cot

TN 7 1

DES sunsel

XTRK XUT
CUST 0

NCOS

RTMB 0 1

ATDN 6012 <--not sure what this should be? main phone I want to ring?--


SCH0265
ATDN 4230 <--used this does this just refer to DN of a phone?---

SIGL grd

TIMP

BIMP

SUPN no

AST

CLS dtn

TKID


NEW TRK TN 007 0 00 01 RT 0 MB 1

MEM AVAIL: (U/P): 1144910 USED U P: 175127 56218 TOT: 1376255
DISK RECS AVAIL: 429
TNS AVAIL: 108 USED: 92 TOT: 200
RAN CON AVAIL: 12 USED: 0 TOT: 12
MUS CON AVAIL: 100 USED: 0 TOT: 100
AST AVAIL: 100 USED: 0 TOT: 100
DATA PORTS AVAIL: 2500 USED: 0 TOT: 2500
ITG ISDN TRUNKS AVAIL: 2500 USED: 0


thanks
t2theroy

 

[johnpoole]

ACOD 6011 <--Unsure what this should be---
any vacant number, usually a non did.. i use a 7 digit number for access codes..

ATDN 4230 <--used this does this just refer to DN of a phone?---

yes that is the phone that will ring when that trunk takes an inbound call..

auto yes turns on atdn on the trunk.. iao defines two way.. i usually set trmb to no, but that will not stop traffic

john poole
bellsouth business
columbia,sc

 

[t2theroy]

Thanks john poole for the reply,
so I should change the ACOD to a 7 digit number referring to a phone number? or is what i have fine ACOD 6011.

ATDN 4230 should I change that to 0 as 0 is the attendant consol 2250.

TRMB should I change that to No or just leave it?

Again I am very new to this and am just trying to use a system that's just sitting around collecting dust.

Do I do anything to the existing phone sets conected to the system or should they just start working? This was configued for another company at one time using a T1 I think.

Thanks
t2theroy

 

[t2theroy]

I must be on the right track as one of the phones rang in my shop, that was programmed ATDN 4230.
I'm starting to slowly piece things together with everyones help and reading other posts.
Now how do I get many phones to ring or do I set my ATDN 4230 (digital phone 3903)to ATDN 0 (attendant console 2250)and just transfer from there?
Also how do I call out? I only get fast busy...


thanks
t2theroy

 

[johnpoole]

6011 will work, you do not want that to be a dialable number from outside.. we use a 7 digit that refers to nothing... ie 8001234.. if it was a did, you could dial it from outside, get dialtone and dial back out.. good way to give away internationl toll..

i always set it to no.. that is only used with ties between two pbx's.. IT will not matter on this route.

nothing will ever just start working in this box. you have to turn on everything in 10 places.. BUT if 4230 is a working station, dial in and it should ring.. then you can change it to zero for that test..

john poole
bellsouth business
columbia,sc

 

[t2theroy]

I am able to receive an incoming call now on the ATDN 4230 and transfer to other DN's.
Now how do I make more internal lines ring on incoming call.
Mainly how do I call out?


thanks
t2theroy

 

[bhassell2000]

you can put the 4230 dn on other phones and they shoudl all ring. What do you get when you try to call out?

Thanks,

Buddy

 

[johnpoole]

ld 20
prt
dnb
cust 0
9

is that defined as ac1? if so, dial 9 plus a number and tell us when you get a busy..

john poole
bellsouth business
columbia,sc

 

[johnpoole]

if i dial 9 434 xxxx, and i get a busy post 434.. i know that 434 is in the box, but aimed wrong.

ld 90
prt
0
nst
ac1
nxx
434.. that will show a rlb.. ld 86 prt rli and look at entry zero.. that assigns RDB and frl.. then in the same ld change rli, at the route prompt enter your new rdb 0 and set the frl to 1.. retest and post the results

john poole
bellsouth business
columbia,sc

 

[t2theroy]

Below is my prt of ld 20 DN 4230... so you mean I should add another DN 4230 with a different TN?
I get a fast busy when trying to call out.
I see the DES is different then what I put in LD 14 is thats whats causing problems with calling out?


>ld 20

PT0000
MARP NOT ACTIVATED

REQ: prt



TYPE: dnb
CUST 0
DN 4230
DATE
PAGE
DES

DN 4230
CPND
NAME test
XPLN 27
DISPLAY_FMT FIRST,LAST
TYPE SL1
TN 005 0 00 06 KEY 00 H MARP DES COSATL 13 SEP 2002
(3903)

thanks
t2theroy

 

[t2theroy]

John poole

REQ: prt
TYPE: dnb
CUST 0
DN 9
DATE
PAGE
DES

DN 9
TYPE NARS
NTBL AC1

thanks
t2theroy

 

[t2theroy]

I think I'm doing this right for what your asking, thanks for helping. i'll post the rest in a second

>ld 90

ESN000

MEM AVAIL: (U/P): 1144910 USED U P: 175127 56218 TOT: 1376255
DISK RECS AVAIL: 429
REQ prt

CUST 0

FEAT nst


ESN009
FEAT ac1


ESN009
FEAT


ESN009
FEAT net

TRAN nst


ESN060
TRAN ac1

TYPE nxx


NXX 434


NXX 434
RLI 0
SDRR NONE
ITEI NONE


MEM AVAIL: (U/P): 1144910 USED U P: 175127 56218 TOT: 1376255
DISK RECS AVAIL: 429

 

[t2theroy]

I see the route is 10 so how do I change it to 0?
I know its
LD 86
REQ chg
CUST 0
FEAT feat
FEAT rlb
RLI
is there a sample i can follow? i started it but stopped as i want to make sure i'm on the right track.

here is what i got from ld 86 prt

>ld 86

ESN000

MEM AVAIL: (U/P): 1144910 USED U P: 175127 56218 TOT: 1376255
DISK RECS AVAIL: 429
REQ prt

CUST 0

FEAT rlb

RLI 0


RLI 0
ENTR 0
LTER NO
ROUT 10
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 2
FCI 0
SBOC NRR
CBQ YES

ISET 1
NALT 5
MFRL 0

 

[t2theroy]

Is this right?
I still get fast busy when trying to call out,

Thanks
t2theroy

Ld 86

REQ prt

CUST 0

FEAT rli


ESN009
FEAT rlb

RLI 0


RLI 0
ENTR 0
LTER NO
ROUT 0
TOD 0 ON 1 ON 2 ON 3 ON
4 ON 5 ON 6 ON 7 ON
CNV NO
EXP NO
FRL 2
DMI 2
FCI 0
SBOC NRR
CBQ YES

ISET 1
NALT 5
MFRL 0

 

[bhassell2000]

what does DMI 2 do?

Thanks,

Buddy

 

[t2theroy]

Honestly Buddy I have no idea, more less just copied the prt that I got from LD 86 Then did the change using the same info just changing the route fro 10 to 0 and frl from 2 to 1
what should it be? here's what I did, could you maybe edit this to what it should be,

Thanks
t2theroy

REQ chg

CUST 0

FEAT rlb

RLI 0

ENTR 0

LTER no

ROUT 0

TOD
AUD000


CNV no

EXP no

FRL 1

DMI 2

FCI 0

SBOC nrr

CBQ yes

ENTR

ISET 1

NALT 5

MFRL 0

 

[bhassell2000]

ld 86

REQ prT
CUST 0
FEAT dgt
DMI 2

Post results so we can see


Thanks,

Buddy

 

[t2theroy]

results

>ld 86
ESN000

MEM AVAIL: (U/P): 1144910 USED U P: 175127 56218 TOT: 1376255
DISK RECS AVAIL: 429
REQ prt
CUST 0
FEAT dgt
DMI 2


DMI 2
DEL 0
CTYP NPA


thanks
t2theroy

 

[bhassell2000]

I personally would change Rt 0 Entry 0 to DMI 0 and see if it helps. Anyone else have an opinion?

Thanks,

Buddy

 

[t2theroy]

You mean I should change route 0 to say route 1 or another?

thanks again helping with this..

below is what i have now still get fast busy when trying to call out.



REQ chg

CUST 0

FEAT rlb

RLI
TIM9304 16:00 9/4/2010 CPU 0
0

ENTR 0

LTER no

ROUT 0

TOD

CNV no

EXP no

FRL 1

DMI 0

FCI 0

SBOC nrr

CBQ yes

ENTR

ISET 1

NALT 5

MFRL 0