Can anyone help me with an issue I have had for a while.
When I have a figure calculated and it comes out as say 4.78. I then display this as 2 decimals which appears as 4.8.
If I have multiple values so 4.78 + 10.833=15.613 - this will appear as 15.61 although the values to 2 decimal places are 4.8 + 10.83= 15.63
As you can see the end result is different. When you are talking about money this can cuase problems with balances.
What do I need to do to have the value set to the 2 decimal value and not hold the real value underneath.
When I have a figure calculated and it comes out as say 4.78. I then display this as 2 decimals which appears as 4.8.
If I have multiple values so 4.78 + 10.833=15.613 - this will appear as 15.61 although the values to 2 decimal places are 4.8 + 10.83= 15.63
As you can see the end result is different. When you are talking about money this can cuase problems with balances.
What do I need to do to have the value set to the 2 decimal value and not hold the real value underneath.