rollover needs to be different size 1

[vze]

Both images in a rollover should be the same size; if the images are not the same size, Dreamweaver automatically resizes the second image.

I need the second image to be displayed at it normal size,
as in
first image 18pX18p
second image 100pX100p

I'v seen this done I just need a bit of help
Thanks

 

[secretsquirrel]

if you remove the height="18" and width="18" from your code, the problem should be solved.

hope this helps,

ss...

 

[vze]

thanks so much, but I have found that changing the size changes both images
what I’m trying to achive is have a small image (icon like)(image 1 visible) which is 18pX18p, when you roll over it it displays a 200pX200p image (no link) roll off it show image one, I also would like to chooses where it appears.

 

[deecee]

then use the show/hide layers instead! [Hammer]
Nike Failed Slogans -- "Just Don't Do It!"

 

[lebisol]

"disjointed rollovers" ....
please do not make 1x1 px-->100x100 px rollover that looks soooooooo crapy and unproffesional...
its like seeing a bird with a broken wing...u fee bad for it but there is nothing you can do about it
so don't break your wings with this pixel uglyness