Rollover/Hunting question

[billb1981]

I have setup internal #'s, non DID's. Our current configuration has a main DID, and then a Rollover #. I would like to set this up on the non DID's I have setup. For example:

DID # 4004
Rollover: 5804

Obviously if the user is on 4004, and someone calls on 4004, it still rings to 5804.

The non DID is not setup that way:

7019
Would like 7319 to be the rollover, but when on the line on 7019, it just rings busy and doesn't roll to 7319. Any help would be appreciated

 

[EddieDuece]

CLS HTA FNA

LHK Key 1 (last hunt key)

 

[jamie2]

Set lhk to 0

 

[EddieDuece]

Better re read this Jamie2

 

[jamie2]

Oppss... I read it wrong. Go with Eddies solution because you need LHK set to 1 with the HTA.

Eddie... You are as fast as Ace! Let's get a coffee.

 

[johnpoole]

if you don't have a hunt target, then

cls hta
hunt 000
lhk 1

if you have a hunt target (mail) then use that instead of 000..

john poole
bellsouth business
columbia,sc