roll over virtual ext to digital ext.

[vicentell]

Hi Everyone.
I would like to accomplish that a virtual extension be reouted to a digital one.
Here my scenario.

I have two Digital Extension. 5713 and 5714 both set on phone sets 3901 and the same configuration. here the configuration for one of them.

*****************************************************
REQ: prt
TYPE: tn
TYPE TNB
TN 6 6
DATE
PAGE
DES

DES OPM
TN 006 0 00 06
TYPE 3901
CDEN 8D
CUST 0
FDN 7000
TGAR 1
LDN NO
NCOS 2
RNPG 1
SCI 0
SSU 0001
LNRS 16
XLST
SFLT NO
CAC_MFC 0
CLS TLD FBA WTA LPR PUA MTD FNA HTD ADD
MWA RMMD AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWA LNA CNDD
CFTA SFD DDV CNID MSID BFED RCBD
ICDD CDMA LLCN MCTD CLBD AUTU
GPUA DPUA DNDD CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ
UDI RCC HBTD AHD DDGA NAMA PRSD NRWD NRCD NROD
USRD ULAD RTDD RBDD RBHD OCBD FLXD FTTC MCBN
RCO 0
EFD 7000
HUNT 7000
EHT 7000
LHK 0
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
DNDR 0
KEY 00 SCR 5714 0 MARP
CPND
NAME SABIOS 2
XPLN 23
DISPLAY_FMT FIRST,LAST
01 TRN
02 AO6
03 CFW 4 5600
04 RNP
05 CWT
DATE 12 FEB 2004

**********************************************************
I tried to use a phantom extension and after that roll over for each phone but looks like this pbx does not support phantom extension.
I looked for them with luvu. type 500. the only displayed me the available 500 ones.

Also I tried to add an additional src but this kind of phones does not support more than one.

Any suggestion.?
thanks in advance

 

[wdhb]

you may need to create a phantom loop in ld97 type = supl make sure you put Nxx in front of the loop number

 

[tipopen]

M3901 is a single line set. You need a multiline set to get roll over appearances.

 

[bala76]

i have a similar problem. I have 3902 sets. I wanted to have one call waiting and next call shud go to call pilot. Please help me