Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

roll over ext an analog line to a 2616 extension help

Status
Not open for further replies.

gbixtelecom

Technical User
Jun 21, 2005
35
US
trying to rollover x1234 on a type 500 analog line to x5678 on a 2616. I've changed CLS to FNA and was expecting the prompt to ask to which extension to rollowver, but it didn't. Any assistance would be greatly appreicated. Thanks.

REQ: prt
TYPE: tn
TYPE TNB
TN 4 0 7 4
SPWD
DATE
PAGE
DES

DES NOC
TN 004 0 07 04
TYPE 500
CDEN 4D
CUST 0
DN 1234 0 MARP
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 2
SGRP 0
RNPG 0
XLST
SCI 0
CLS UNR DTN FBD XFD WTA THFD FNA HTD ONS
LPR XRD CWD SWD MWD LPD XHD CCSD LND TVD
CFTD SFD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD CPFA CPTA DDGA NAMA
SHL ABDD CFHD
USRD BNRD OCBD RTDD FAXD PGND FTTC
RCO 0
PLEV 02
AACS NO
DATE 16 OCT 2006
 
add CFTA & CFTA & set easy chg yes,fdn = extn

Remember if it doesn't work hit it harder

Scott UK
 
i ment CFNA & CFTA god my typing getting worse

Remember if it doesn't work hit it harder

Scott UK
 
On 500 sets
CLS FNA
FTR FDN xxxx Number you want phone to forward to if no answer

HUNT is for BUSY on phone
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top