Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

roddi command for a numbering range?

Status
Not open for further replies.

REP000

Technical User
Dec 1, 2009
3
ES
I need a roddi command for a numbering range.
If i get a single number, this command is shuch this:
roddi:dest=8989,rou=50,...;
But if i want to do this for a numbering range (8000-8975), exist any command in MD-110 PBX for it?

Otherwise I would have to do:
roddi:dest=8000,rou=50,...
roddi:dest=8001,rou=50,...
...

roddi:dest=8975,rou=50,..

(976 times!)

 
Or you could try
dest=80
dest=81
..
dest=88
dest=890
..
dest=896
dest=8970
..
dest=8975
(22 times)
 

takes 5 minutes to write in excel and export as txt file tab delimited and then run in winfiol F2 in the way described.

best parnum
 
If i have destination range as you have i will define destination 8 to route 50 and job is done!
 

8976 to 8999 are not dest codes so that's not correct

best parnum
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top