Rockwell Modem says "no dial tone".

[Guest_imported]

Internal in a HP 4450 Pav.

I have check the line and used an external on it.
I do have it plugged into the right port on the modem.
I go to Modems in Contol Panel and the modem does communicate in the Diags.
Everything in the Device Manager is ok.
The modem is configured properly....

Sometimes I will get "Port in Use" if I try and go in the Modem Diags after I have dialed.
I have tried deleting the COM ports and letting Windows set it back on boot. I have reinstalled the modem and the software.
I do not know where to find divers for this ohter than the one download offers. I do not know any Tech Support numbers.

Please send response to lyonsja@jmu.edu

Thanks for all your time.

J

 

[Comtech]

Boot to safe mode.
Remove the modem and all com ports in device manager.
Restart, reinstall.
Go to Start > Run > and type in inetwiz
Make a new connection. [sig]<p>Jim<br><a href=mailto:reboot@pcmech.com>reboot@pcmech.com</a><br><a href=

http://members.cnx.net/reboot/>Jim

& Sue's Free Files</a><br>Current moderator at

http://www.56k.com<br>

Staff contributor/moderator at

http://www.pcmech.com<br>

Windows 9x/ME instructor.<br>
Jim's Modems:

http://members.cnx.net/reboot/modems/

[/sig]