RLS

[nickshi]

hi, what RLS value is in LD 17 DCH for a Succession 3.0/4.0 at far-end? thanks.

 

[johnpoole]

depends on the rls of the switch on the far end... if it's a provider you'll need to check with them.. that prompt being blank can cause pri227 errors

john poole
bellsouth business
columbia,sc

 

[nickshi]

sorry John, far end is a Succession 4.0. what to be set on the local Rls. 25? thanks.

 

[phnechic]

We had to set both ends of the circuit to 25 in our network until we got everything up to 3.0.

 

[johnpoole]

in a 3.0 if needed i would use rls 25 interface type to the far end But in rls 25 rls 3 may not have been an option.. the best thing about rls between two meridians, it usually works even if it;s blank.. you may lose a feature but the pri doesn't take hits to the lcnt table and dis

john poole
bellsouth business
columbia,sc

 

[nickshi]

thanks john. thanks phnechic.