Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RLC Card replace on library SL500

Status
Not open for further replies.

R1957

Technical User
Jan 10, 2010
26
AR
Hi,

Can I replace a RLC card with 1007 level of firmware, for install a new RLC with 1300 firmware directly?.

I will replace the robot also, (for a level 3 hardware).

(I can´t find the firmware 1011/16/ etc. to 1048 for to do an firmware upgrade on the old card).

Thanks in advance,
 
Hi,

This is an update of my problem:

The problem was the new firmware,(1232), on the new RLC card. It needs one power supply each module, and the librería only had PS on the first and the second module.

With four PS, the init ended OK.

Thanks,
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top