Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

RJ11 Connector

Status
Not open for further replies.

Beansie65

Technical User
May 22, 2018
2
US
TS_52Pro_with_RJ11_hwwkz7.jpg

I am looking for the name of this particular RJ11 connector and where I may purchase a bag from? I have tried searching for this under different names and descriptions, even went to Fluke but no help. This type looks much more durable the the standard RJ-11 and I think I want to replace all my toners and test equipment with these. Thanks in advance.

Jim
 
I terminated mine in a standard 8-conductor plug, plugged into an 8-conductor coupler, but snipped the tab so it won't come out without using a spudger to reach in and disengage. THEN, use a double ended modular cord with the K style plugs on each end. Adds just a little bit of bulk to the lead, but you can pop out the short cord and plug in a line cord that is coming from a jack that can't be reached.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top