Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Rings on call forward 1

Status
Not open for further replies.

SnakeTech

IS-IT--Management
Apr 29, 2005
53
US
Hi All,

Perhaps someone can help me..

I have a VP that forwards her calls to the admins 3904.

The question is:

Can the amount of rings be changed before forwarding?

She wants to have it ring twice so she can pick up.

Dont ask why she has an admin then.. lol!!

ST~~~~~
 
Code:
ld 21
prt
rdr
CFN0 3
CFN1 4
CFN2 6

in the rdr data you have 3 choices, cfn0 is rco 0 on the set. look at those assignments, be carefull, if i change cfn2 in my switch to 2 rings, all sets with rco 2 will change to two rings before fna..
 
I looked in LD 21..
But I am not sure if this is for one particular extension..
So how does this change it for one ext?

This is what shows below:
REQ: prt
TYPE: rdr
TYPE RDR_DATA
CUST 0
TYPE RDR_DATA
CUST 00
OPT CFF CFRA PVCD CWRD MCI
FNAD FDN
FNAT FDN
FNAL FDN
CFTA NO
CCFWDN
CFN0 4
CFN1 6
CFN2 4
DFN0 4
DFN1 4
DFN2 4
DNDH NO
MDID NO
NDID NO
MWFB NO
TRCL 0
CRT0 00 00 00 00
CRT1 00 00 00 00
CRT2 00 00 00 00
CRT3 00 00 00 00
DAY0
DAY1
DAY2
DAY3
 
First determine the RCO value for each phone TN. Then if for example, there is no phones with "RCO 1", you can change the CFN1 to "2" and the DFN1 to "2" and then change the persons phone to "RCO 1"

The CFBN and DFN 0,1,2 and the three possible places to put the number of rings. the corrosponding setting on each phone is RCO 1, 2, 3

~
 
CFN0 4
CFN1 6
CFN2 4

because cfn2 is default, both 0 and 1 have been changed if you go to 15 and change cfn2 2 (chg rdr), then do an echg on the set rco 2, that set will ring twice then fna.. you can't tell if you have any sets on rco 2 without printing a complete tnb and search for rco.. but since cfn0 and cfn2 are both 4 rings, there would be no reason to change a set to rco 2, since rco 0 is default...

chg
2616
x x x x
echg yep
rco 2

ld 15
chg
rdr
return down to cfn2 2..

john poole
bellsouth business
columbia,sc
 
Hi John,

I made the changes above..

But it still does not work.

Do you see any other changes to be made?

ST~

REQ: prt
TYPE: tn
TYPE TNB
TN 8 0 7 10
DATE
PAGE
DES

DES IE1854
TN 008 0 07 10
TYPE 3904
CDEN 8D
CTYP XDLC
CUST 0
FDN 8800
TGAR 12
LDN NO
NCOS 7
SGRP 0
RNPG 0
SCI 0
SSU 1000
LNRS 20
XLST
SCPW 000
CLS CTD FBD WTA LPR MTD FNA HTA TDD HFA GRLD CRPD STSD
MWA LMPN RMMD SMWD AAD IMD XHD IRA NID OLA VCE DRG1
POD DSX VMD CMSD SLKD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID CDCA MSID DAPA BFED RCBD
ICDD CDMD LLCN MCTD CLBD AUTU
GPUD DPUD DNDD CFXD ARHD FITD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID BUZZ AGRD MOAD AHD
DDGA NAMA
DRDD EXR0
USMD USRD ULAD RTDD RBDD RBHD PGND OCBD FLXD FTTC DNDY DNO3 MCBN CDMR
CPND_LANG ENG
RCO 2
HUNT 8800
LHK 1
LPK 11
PLEV 02
CSDN
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
MLNG ENG
DNDR 0
KEY 00 SCR 5103 0
02 SCR 70103 D MARP
03 VCC 70123
04 ADL 20 5229
05 ADL 20 5106
06 ADL 20 5106
07 ADL 20 5229
08 ADL 20 5261
09 ADL 20
10 ADL 20
11 ADL 20 5229
12
13
14
15
16 MWK 8800
17 TRN
18 AO6
19 CFW 4 5153
20
21 PRK
22 RNP
23 SCC 5103
24
25
26 CPN
27 CLT
28 RLT
29
30
31
 
Hi,
I belive the changes were for forward no answer not when using the forward key.
 
Hmmm

I hope I explained it right..

VP wants to forward the calls to admin..

But allow 2 rings before it goes to the forwarded DN.

Are these the changes I am making in LD 15 and on the phone?

ST~
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top