Ringing group on MICS

[thebiggerhalf]

ON a MICS 7.1, have a ringing group with 5 members. Only 4 of the group ring. I can't get the 5th to ring. I changed the set, changed the port and copied a ringing set's parameters, (system and data), to the non ringing set. Still no dice. Any suggestions?

 

[RikRodgers]

DND? Or, is the set forwarded?

Or, are you sure it's the right ext you're checking? I've made the same mistake in the past when I've been in a hurry. Assumed a set was a particular extension, and gone troubleshooting without pressing f*0 first.

 

[thebiggerhalf]

Rik.
No DID, No call forward. If you call into the system, V/M answers, dial that ext. #, it rings just fine. Only on the ring group it refuses to ring.

 

[RikRodgers]

Is that ext a ringing set for inbound calls, outside of the hunt group?

Double check your hunt group. I'd try removing that set, and adding it again. If that fails, reboot the system.